Showing all 9 resultsSorted by latest
-
315 Ton Closed Frame Hydraulic Press for Composite and Metal Forming
Uneven pressure can affect composite part quality. This 315 ton closed frame hydraulic press provides high frame rigidity and stable forming pressure for more consistent SMC and BMC molding.
-
160 Ton Four Column Hydraulic Press for Metal Forming and Bearing Pressing
160 ton four column hydraulic press for metal forming, bearing pressing, and sheet metal assembly. Features an 800 × 800 mm worktable, 900 mm daylight, and fast-approach circuit.
-
160 Ton Gantry Hydraulic Press for Flange Leveling and Structure Correction
A 160 ton gantry hydraulic press with 500×400mm table and 300mm daylight delivers the force distribution needed for flange leveling, but the real constraint is how the open-frame geometry handles off-center loads during steel structure correction. The welded crossbeam and dual-column layout distribute 160 tons across the full worktable, maintaining ≤0.1mm flatness on metal flanges up to roughly 350mm in diameter.
-
Hydraulic Plate Leveling Press for Steel Plate and Profile Straightening
What happens when a large steel plate comes off the line with a bow or twist that a standard press cannot correct? The part gets rejected, or worse, it moves downstream and causes assembly problems later. A hydraulic plate leveling press addresses this by applying controlled, distributed pressure across the full plate surface rather than a single concentrated stroke, which is why flatness tolerance becomes something you can actually hold instead of hope for.
-
125 Ton C-Frame Hydraulic Press for Precision Metal Stamping
A 125-ton C-Frame hydraulic press built for high-speed stamping of small and medium parts, with ±0.1mm guide accuracy, a 63-ton lower ejector, and an open-front frame that saves 30% floor space. Ideal for electronics punching, cutlery deep drawing, and precision hardware — send us your die drawing and we'll confirm the right configuration.
-
160 Ton Hydraulic Vulcanizing Press for Rubber & Fiberglass Molding
A 160-ton hydraulic vulcanizing press built for rubber and fiberglass molding, with ±1°C PLC-controlled heating, a movable platen for fast mold changes, and pressure-holding shutdown to cut idle power. Ideal for tire vulcanization, seal molding, and composite parts curing — tell us your mold size and we'll confirm the right configuration.
-
100T Hydraulic Punching Press
Engineered for high-speed punching and blanking operations, this 100T hydraulic punching press delivers precise cutting force for sheet metal fabrication. Features air cooling system, 960×530mm worktable, and 10-ton lower ejector for efficient part removal. Ideal for automotive parts, electrical enclosures, and general metal stamping applications.
-
20T Gantry Press for Bearing Assembly
Engineered for precise bearing installation and shaft pressing, this 20T manual gantry hydraulic press offers controlled force for interference fit tasks. Features a compact 450×400mm worktable and 800mm opening height, ideal for workshop assembly operations.
-
100T Hydraulic Press for Deep Drawing and Sheet Metal Forming
This 100 ton four column hydraulic press with hydraulic cushion is designed for precision sheet metal deep drawing applications where forming stability and surface quality are critical. With a rigid three-beam four-column structure, it provides excellent load balance and consistent pressure distribution during forming cycles. It is widely used in metal stamping and drawing processes for industrial components requiring accurate shape control and smooth production performance.
